Water Cooling Block Liquid cold plate CNC machined from pure copper CPU chiller

Description

All copper water block Liquid cold plate heat exchanger to rapidly remove heat from CPUs, Xbox CPUs, GPUs, video cards, IGBTs ( SOT-227 cooling ), power electronics, lasers, peltier TECs or power generation TEGs. Most efficient method of removing heat from electronics.
Heat removal is 4 to 5 times greater with this water block than using just a finned heat sink.
Components can be mounted to one or
both
sides thereby allowing heat removal from two 40x40mm TECs or other electronic components at the same time.
All copper construction allows for parts and components to be soldered to cold plate for maximum thermal conduction.
Superior USA manufacturing, CNC machined from solid 99.9% pure copper. Do not confuse this liquid cooling plate (waterblock) with inferior cheap water blocks that will NOT deliver on cooling ability. You get what you pay for.
100% Made in the USA by Custom Thermoelectric, LLC., based in Bishopville, Maryland.
Measures: 1.62 x 1.62 x 0.55 inches
Weighs: .34 lbs (154 gm)
Inlet and Outlet on the same side.
Usable flat area of 1.62 x 1.62 inches (41 x 41 mm) per side
Inlet & outlet tapped 1/16" NPT: Comes with 2 pieces Nylon barbed tube fittings for 3/16" ID tubing.
Will accommodate
per side
;
Single TECs or TEGs up to 40 x 40mm
2, 3, or 4 TECs up to 20 x 20mm
Any component (to be cooled) up to 41x41mm
CNC Machined from a solid billet of copper. solder brazed together to a 100 psi rated watertight seal.
Minimum flow rate: 0.1 gpm. Maximum flow rate: 2.5 gpm.
Water flow rate GPM
Thermal Resistance
°C/watt
0.2
0.044
0.4
0.033
0.6
0.029
0.8
0.025
1.0
0.023
eBay no longer allows external links for spec sheets and drawings.  Please Google the part number WBA-1.63-0.55-CU-01 and this product page will show up with all the spec sheets, data, drawings and 3D models you need.
PDF of Thermal Resistance graph for this Water Block:
3D Solid models
are available at no charge, just ask.
Matching cold plate (last picture) is part number
CPT-2.25-1.62-0.25-AL
and is NOT included in this auction.
NOTE: Some pictures show the water block as separate pieces. This is only to show the details of the high heat transfer efficiency design of the interior surfaces.
All water blocks come assembled ready to use
.
Water blocks are also called;
Waterblock or waterblocks
Cold plate or cold plates
Liquid exchanger or liquid heat exchanger
Liquid manifold
Water jacket
Peltier Liquid Block or Thermoelectric Liquid Block
Liquid cooler
Liquid cold plate or Liquid Cold Plates
Liquid cooling plate
Liquid heat sink or liquid heatsink
Water cooling plate or water cold plate
Liquid chassis
Custom water blocks available.  Please contact us.