US Solar Mounts DB72 Replacement Diffuser Tube Bubble Tubing Repair 80" Section

Description

This listing is for 1 - 80" ( 6.6' Long ) section of replacement diffuser tubing used on the US Solar Mounts DB72 Diffuser.   This is for a complete 6.6' Long section of bubble tube ONLY.  Does not include the
stainless-steel
base, fittings, outlets, or any other parts or pieces.
Cut to size to replace your tubes.
If your tubing is clogged, ripped, cut, damaged, easily replace it with this section of identical diffuser tube.
High-Quality Aeration Tubing produces greater flow rates with much lower back pressure than industry-standard rubber membranes- at 2 CFM, ONE 36" Diffuser Tube produces 600 Gallons per minute!
Give your small to large pond great aeration with this tube diffuser.
This tubing is made for this application and perfect when combined with our aeration supplies in our store - which we have for sale also - check out our store for aeration kits, compressor and aeration parts, pieces and any and all accessories you might need!
Easy assembly in only a few minutes.
NO Membrane- NO Backpressure!
The High-Efficiency Diffusers from U.S. Solar Mounts are a step above the rest, utilizing extruded EPDM Fine-Bubble tubing instead of industry-standard rubber membranes.
Compatible with
Any Aeration Compressor
we sell in our store over 1-CFM.
If moving and oxygenating extremely large volumes of water is what you need, this is THE diffuser for the job.  Perfect for large water bodies and Frac Water Normalization Tanks.
Compatible with
Any Aeration Compressor
that can deliver at least 2-2.5 CFM air.  We have lots of these in our store here: https://www.ebay.com/str/diypondaeration/New-Pumps-Motors/_i.html?_storecat=23406081018
Each diffuser is ruggedly constructed using high-quality,
American-Made
components. The DB72 is constructed of High-Density, PE Plastic and stainless steel. Assembly takes only about
5 Minutes
making installation quick & easy. Features like stainless steel band clips, dual-size hose strain relief, and a massive water flow rating set the DB72 apart from the competition.
Compatible with 3/8" or 1/2" ID Hose - We have both here:  https://www.ebay.com/str/diypondaeration/Self-Sink-Weighted-Tube/_i.html?_storecat=23406219018
DIFFUSER FEATURES:
72" of
High-Efficiency
Fine-Bubble Aeration Tubing
Solid, Laser-Cut Stainless Steel Base.
Unaffected by salt-water, Brackish Water or Frac Water
Lifts
1250 GPM
@ 5CFM Input
Ultra High-Flow Design
Works well in any depth profile >4'
Virtually No Added Backpressure
Check Valve Included
Completely
American-Made
Self-Sinking
Stainless Steel Uprights & Hardware
Will never rust or corrode
Unique Design
Stays upright at the bottom of your pond
Built-In Handle for
Easy Deployment
Included Hose Strain Relief for 3/8" or 1/2" Hose
Easy to Clean and Very Low Maintenance
Effective up to 100'
2-3mm Bubbles for Increased Diffusion Rates
Give your small to large pond great aeration with this tube diffuser.
This tubing is made for this application and perfect when combined with our aeration supplies in our store - which we have for sale also - check out our store for aeration kits, compressor and aeration parts, pieces and any and all accessories you might need!
We are your one stop for any compressor or aeration supplies!!
We ship 5 days a week - we are a business - most items ship same day or day after excluding holidays and weekends.