US Solar Mounts DB36 Replacement Tubing Diffuser. 48" of Bubble Tube Repair Part

Description

This listing is for 1 - 48" section of replacement diffuser tubing used on the US Solar Mounts DB36 Diffuser.   This is for a 4' section of bubble tube ONLY.  Does not include the stainless steel base, fittings, outlets, or any other parts or pieces.
If your tubing is clogged, ripped, cut, damaged, easily replace it with this section of identical diffuser tube.
High-Quality Aeration Tubing produces greater flow rates with much lower back pressure than industry-standard rubber membranes- at 2 CFM, ONE 36" Diffuser Tube produces 600 Gallons per minute!
NOTE** - 36" of tubing is wrapped around the base with an approximate 14" diameter.
But this will give you a little extra!!
Give your small to large pond great aeration with this tube diffuser.
This tubing is made for this application and perfect when combined with our aeration supplies in our store - which we have for sale also - check out our store for aeration kits, compressor and aeration parts, pieces and any and all accessories you might need!
Easy assembly in only a few minutes.
NO Membrane- NO Backpressure!
The High-Efficiency Diffusers from U.S. Solar Mounts are a step above the rest, utilizing extruded EPDM Fine-Bubble tubing instead of industry-standard rubber membranes.
Compatible with
Any Aeration Compressor
we sell in our store over 1-CFM.
Each diffuser is ruggedly constructed using high-quality,
American-Made
components. The DB36-B is a bolt-together package and is constructed of laser-cut stainless steel, making installation quick & easy. Features like a built in handle, dual-size hose strain relief clamp, make the DB36-B a truly premium design.
DB-36 SPEC SHEET
DIFFUSER FEATURES:
Fast, Bolt-Together Design
36" of
Premium
High-Efficiency, Fine-Bubble
Tubing
Lifts
600GPM
@ 2CFM Input
Works with 3/8" or 1/2" ID Air Hose
High Flow Design
Works in any depth profile
Virtually No Added Backpressure
Check Valve Included
Completely
American-Made
Lightweight
Design for Shipping and Handling
Self-Sinking
Heavy-Duty Stainless Steel
-
Will not rust or corrode
Unique Design
Stays upright at the bottom of your pond
Built-In Handle for
Easy Deployment
Stainless Steel Hose Strain Relief for
3/8" or 1/2" Hose
Easy to Clean and Very Low Maintenance
Effective up to 100'
3mm Bubbles for Increased Diffusion Rates
We are your one stop for any compressor or aeration supplies!!