Transistor Tester Esr Lcr Meter Automatic Identify Mosfet Capacitor Resistor Tes

Description

Bside Transistor Tester ESR LCR Meter Automatic Identify Mosfet Capacitor Resistor Tester Inductance NPN PNP Checker with Tweezers
[Multi-functional Transistor Tester]: It is very easy to test plug-in and SMD devices, it can also be used to test different kinds of triodes, thyristors, MOSFET, enable to analysis the device , the polarity of the pin, the output HFE, the valve voltage, the junction capacitance of the FET.
[Automatical Identification]: Bide smart technology make this transistor checker can automatically detect NPN and PNP transistors, N-channel and P-channel MOSFET, diodes, thyristors, resistors, capacitors or other devices.
[2 POWER/TEST Button]: POWER/TEST button on both sides, you can operate it with your left or right hand.
[Easy to Use]: Single key operation, there is a table "typical ESR value of electrolytic capacitor" at the back, provide a clear indication that you can quickly understand and use it.
[Added Functions]: The transistor tester will be auto power off to save energy if there is no any operation within about 10 seconds. Large LCD display with backlight function for easy reading.
Features: - A key operation, boot test, a key to get - Automatically test the pin elements and show them on the LCD - Automatic detection of NPN, PNP bipolar transistors, N-channel and P-channel MOS field-effect transistors, junction FET, diodes, diodes, thyristors, low power unidirectional and bidirectional thyristors - Automatic identification element pin arrangement - Bipolar transistor current amplification factor and base-emitter threshold voltage measurement - Identify the LCD transistor by the base emitter threshold voltage and the high current amplification factor - Gate MOS FET threshold voltage and gate capacitance measurement - Two resistors and resistor symbols can be measured simultaneously. The right shows a decimal value of 4. Both sides of the resistor symbol show the number of pins - Can measure a single diode reverse capacitance. If the bipolar transistor is connected to the collector and emitter of the base and pin, the collector or emitter junction reverse capacitance can be measured Specifications: - Resistor: 0 - 50MO; Resolution: 0.01O - Capacitor: 25pF - 100mF; Resolution: 1pF - Inductor: 0.01mH - 20H; Resolution: 0.01mH - Capacitor ESR: 2uF - 50mF; Resolution: 0.01O - Power: 1 * 9V - Size: 14.0x8.2x4.6 cm - Weight: 223g Package Includes: 1 * Transistor Tester 1 * Test Tweezers 1 * User Manual Notes: - Before testing the capacitor, be sure to discharge it, otherwise it may damage the internal circuit - If using DC power supply, please choose DC 9V - 12V adapter (including 9V and 12V) - It is powered by 1pcs of 9V battery (not included), when the battery power is under 6V, please replace it with a new one - There is a protective film on the screen, we suggest you remove it
SHIPPING
Domestic Buyers
- We have confidence in our products, but if you are not fully satisfied please contact us within 30 days of purchase and you will get full refund.
- We ship within 3 business days of payment, usually sooner
- We offer FREE shipping on all orders!
- We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed
International buyers
– please note: Import duties, taxes, and charges aren't included in the item price or postage cost. These charges are the buyer's responsibility.
- Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
*  Order Cancellation Policy **
You can return a product for up to 30 days from the date you purchased it.
1. The seller reserves the right to cancel the special case only due to eBay cancellation fee.
2. The decision of seller is the final.
3. The seller will respond to the cancellation request within 2 business days. Please wait for the result of cancellation.
4. In case the cancellation is not completed by some reasons, the buyer can follow the options below to get the refund.
4.1 The buyer can reject the item when it arrives.
4.2 The buyer can send the item back to the seller within 30 days If the buyer receives item (USA Shipment ONLY). The seller will provide the FREE return label to the buyer when the buyer opens " Return Item" case on eBay by using the reason as "Change my mind" ONLY.
5. When buyer has placed the order. The order will be processed and completed by automatic warehouse system within 5 minutes. In case that buyer sends the cancellation request after 5 minutes of placing the order, the request will be rejected.
**Sending direct message to cancel the order is not allowed for every case.*
Return Policy
For the return case
- If buyer would like to return the items for refund or replacement, please CONTACT SELLER to receive the free return label from seller. The refund or replacement will be processed with the tracking number of return label which is provided by seller only. The other ways of return which are not approved by seller will not be processed for the refund or replacement.