Ph Meter Digital Ph Tester 0.01 Ph Accuracy Water Quality Tester Kit For Househo

Description

PH Meter for Water, 0.01 Accuracy PH Tester Digital Kit with 0-14 PH Measurement Range for Household Drinking Water, Swimming Pools,Hydroponics and Aquariums
Easy To Use : ph meter is factory calibrated,turn on the switch, After placing the pH acidity tester in water about 1 minute you can get the most accurate measurement data. You need to cal it again if don't use it for a long time.
ATC Function: Ph probe with Automatic Temperature Compensation(ATC) .it can accurately determine the pH value of the sample in a range of 0°C - 60°C (32°F - 140°F).So you don't worry about temperature of the sample
Pocket size : PH tester It is small in size, and can be conveniently placed in a pocket when going out,LCD screen makes reading clearly so you can take measurements anytime .
Wide Use: Ph water tester Ideal for residential or commercial use, water, pool,spas,liquid food,laboratory and hydroponics ph test 3.ATC Function: Ph probe with Automatic Temperature
What You Get : 1x alkaline water tester, 2 x 1.5V button cells (built in),1x Carrying case,3x PH Buffer Powders,user manual, 1-year warranty and friendly customer service.
▲PH Meter Introduction: pH tester comes factory calibrated, pls use it directly. No calibration is required for the first use, pH meter number jumps, and 0 is displayed after it, which is normal automatic detection. Note: Recalibration is requires in the following conditions ▲Lengthy periods of inactivity ▲Very frequent use ▲The testing accuracy requirement is very high ▲The “cal”(calibration)button was pushed and electrode exposed to air extended period of time Calibration tips: 1.Dissolve PH buffer powder in 250ml of distilled water.(Be sure to add water according to the required ratio, otherwise it will affect the accuracy of the calibration and increase the error) 2.Turn on PH meter and clean the electrode in distilled water, then immerse the electrode in the PH standard solution. 3.You can simply follow the instruction on the provided packet of solution , press “ CAL” button, wait until the reading is the same as the PH value of buffer powder and steady. 4.Clean electrode with distilled water and dry it. Specifications: Measure Range: 0.00-14.00pH Resolution: 0.01pH Accuracy: ±0.05pH Power Supply: 2 * 1.5V LR44 Batteries Operating Temperature: 0℃~80℃ Dimensions: 15.3 x 2.9 x 1.6 cm Weight: 52g Package Content: ▲1x Digital PH Meter ▲1 x Carrying case ▲3x PH buffer powder ▲1x Instructions REMINDER: 1. Pls make the connecting shrapnel of the battery case orient towards the side of LCD display, when you install battery case into the PH meter, to avoid battery case that are got stuck in PH tester. 2.Pls recalibrate the PH tester after open the battery ca
SHIPPING
International buyers
– please note: Import duties, taxes, and charges aren't included in the item price or postage cost. These charges are the buyer's responsibility.
- Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Domestic Buyers
- We ship within 3 business days of payment, usually sooner
- We offer FREE shipping on all orders!
- We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed
- We have confidence in our products, but if you are not fully satisfied please contact us within 30 days of purchase and you will get full refund.
*  Order Cancellation Policy **
You can return a product for up to 30 days from the date you purchased it.
1. The seller reserves the right to cancel the special case only due to eBay cancellation fee.
2. The decision of seller is the final.
3. The seller will respond to the cancellation request within 2 business days. Please wait for the result of cancellation.
4. In case the cancellation is not completed by some reasons, the buyer can follow the options below to get the refund.
4.1 The buyer can reject the item when it arrives.
4.2 The buyer can send the item back to the seller within 30 days If the buyer receives item (USA Shipment ONLY). The seller will provide the FREE return label to the buyer when the buyer opens " Return Item" case on eBay by using the reason as "Change my mind" ONLY.
5. When buyer has placed the order. The order will be processed and completed by automatic warehouse system within 5 minutes. In case that buyer sends the cancellation request after 5 minutes of placing the order, the request will be rejected.
**Sending direct message to cancel the order is not allowed for every case.*