Keeptop Non-Contact Voltage Tester - Electrical Tester with Dual Range AC 12 ...

Description

Brand New Keeptop Non-Contact Voltage Tester - Electrical Tester with Dual Range AC 12 to 1000V, Live/Null Wire and Circuit Tester, Voltage Detector with Flashlight and Pocket Clip
Manufacturer model:
HT90
Non-Contact Design - The voltage tester features a non-contact and double-insulated design. The NCV sensor automatically identifies the voltage and alerts by sound and light. This voltage detector is safe for electricians, maintenance, service, safety personnel, and homeowners to test live circuits in the workplace or at home.
Dual Range Voltage Tester - This electrical tester comes with 2 sensitivity modes, high sensitivity mode (12-1000V AC) and low sensitivity mode (48-1000V AC). Simply press the "S" button to adjust the sensitivity for different needs and situations.
Sound and Light Alarm - When voltage is detected, the voltage tester will flash and beep. You can distinguish live wire and null wire by different sounds and indicators. When all the red lights are on, it means that high voltage and live wire are detected, and only one red light is on to indicate that low voltage and null wire are detected. The higher the voltage detected, the higher the frequency of its beeping sound.
Auto Shut Off - To save energy and extend battery life, the voltage detector will automatically shut down after about 5 minutes of no operation. The power LED will flash when the battery voltage drops below 2.5V. Please replace the battery promptly.
Compact Design - The probe is equipped with an LED light that doubles as an emergency flashlight, which is especially useful and convenient in dark work areas. The small size with pocket clip allows you to carry it easily and can help you quickly test circuit breakers, lighting fixtures, switches, outlets, wires, and more.
Description
Product Description
Null Wire Testing
The indicator light flashes slowly and only one red indicator light up. It means that the tested line is a Null Wire.
Live Wire Testing
The indicator light flashes quickly and red indicators all light up. It means that the tested line is a Live Wire.
Wire Breakpoint Test
Move the NVC probe of the voltage tester along the wire, if there is a red indicator and high-frequency beep, the wire is with electricity. If the voltage alert signs disappear, that is most probably the breakpoint.
2 Sensitivity Modes
The voltage tester comes with high sensitivity mode (AC 12V-1000V) and a low sensitivity mode (AC 48V - 1000V). It shows you whether there is voltage or not, also indicates that the voltage is high or low. After turn on the voltage detector, the default mode is the low sensitivity test.
Bright LED Flashlight
The voltage tester can use as an emergency flashlight, which is especially useful in the dark working area. When the voltage tester is turned on, press the “S” button for 3 seconds to turn it on or off. After about 5 minutes, the flashlight will auto-off to extend battery life.
Replace the Battery
When there is a low battery indicator, please replace the battery in time. Press the buckle, push the battery cover away from the body. Install the new battery according to the positive and negative instructions on the voltage tester.
Package List
1 x Keeptop HT90 Voltage Tester
2 x 1.5V AAA Batteries
1 x User Manual
Read more
Sound & Light Alarm
The red lamps of the voltage tester will light up and beep when the voltage is detected. You can distinguish the live wire and null wire through different frequency alarm sounds and indicators. The higher voltage detected, it beeps at a higher frequency and the red indicators all light up.
Low Battery Indicate
When the battery voltage drops below about 2.5 volts, the power indicator will flash. When the battery voltage drops below about 2.3 volts, the voltage detector will automatically turn off.
Auto Shutdown to Save Energy
To save more energy and extend battery life, after about 5 minutes of no operation, the voltage detector will automatically shut down.
User-Friendly Design
Small-size with pocket clip allows you to carry it anywhere and take it out easily, which can help you quickly test energized circuits in the workplace or at home. The best choice for electricians, maintenance, service, safety personnel, and homeowners.
Read more
Shipping and Handling
Please allow 5-7 business days for the package to arrive, regardless of buyer location within the US.
We will provide an online tracking number to you once the item has been shipped.
It may take a few business days for our automated system to process the tracking number onto eBay. However, this will not affect the shipping times.
Return Policy
All our products are brand new and sealed. All items qualify for returns within 30 days of receipt.
Feedback
We take our reputation seriously. If you have any questions or concerns, please contact us and we will respond back to your message within 24 hours.