FiTech 93012 Go EFI 8 1200 HP EFI System Power Adder,w/CDI box

Description

The retrofit fuel injection revolution has begun! FiTech is the leading name in EFI conversions for good reason, bringing not only economy to the market but simplicity through design. The switch to fuel injection has never been easier. FiTech’s technology is designed and developed using OEM level engineering and components. All throttle bodies have built-in computers and sensors, reducing the amount of wiring to route in your vehicle. You can run the system on only 4 wires and two sensors! The sensors are OEM style for proven reliability and easy replacement
FiTech 93012 Go EFI 8 1200 HP EFI System Power Adder,w/CDI box
Sku # 52193012
Mfr. Part # 93012
Condition
New
Brand
FiTech
Sold
Kit
Details
Info
The retrofit fuel injection revolution has begun! FiTech is the leading name in EFI conversions for good reason, bringing not only economy to the market but simplicity through design. The switch to fuel injection has never been easier. FiTech’s technology is designed and developed using OEM level engineering and components. All throttle bodies have built-in computers and sensors, reducing the amount of wiring to route in your vehicle. You can run the system on only 4 wires and two sensors! The sensors are OEM style for proven reliability and easy replacement.
FiTech Go EFI 8 Power Adder Plus 1200 HP Fuel Injection System
:
The FiTech ECU also controls several vital engine functions including dual adjustable electric fan controls, fuel pump voltage regulation to reduce noise and heat buildup, and an integrated fuel pressure regulator ensures the unit is always at the correct fuel pressure. The wet flow annular discharge design improves fuel atomization, distribution, and intake charge cooling, which is critically important for boosted engines.
Unique Features:
Boost-ready throttle body
Boost-ready ECU with 2.5 bar MAP sensor good for 21.7 PSI
Nitrous control with a host of safety features and accessories for nitrous tuning
Nitrous and boost specific target A/F target options
Boost and nitrous timing retard strategies
Dual fan control (can set at separate temperatures)
Advanced hand held tuning mode enabled
Pro laptop software allows complete tuning for professional tuners
You also get the standard features included in ALL of the FiTech Go EFI systems:
Eight high-flow injectors good for up to 1200 HP
Initial setup is quick and easy - simple touch screen selections get you up and running in minutes
Self-tuning EFI - after startup the self-learning ECU immediately takes over and provides your vehicle with an optimum tune
Basic install can be done with just 4 wires and 2 sensors to install
ECU is mounted on the throttle body so there is NO external boxes, harnesses or relays to clutter up your engine compartment, saving you time and keeping things simple & neat
Uses a Bosch 4.2 wide band O2 sensor while all other sensors are easily replaceable GM style parts
Air/fuel ratios can be optimized on the fly as you drive! Try that with your carb.
Throttle bodies have a completely universal base to fit any 4-bbl carb manifold
Throttle linkage suits most transmissions
Choice of three fuel inlet connections
All Go EFI’s feature Voltage Control fuel pump control which reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing!
Go EFI features wet flow technology with a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION! Check out our videos, you need to see it.
Ignition timing can be controlled and adjusted on the fly from your touch screen controller
Use of ignition timing control is optional and not required
Will work with CDI box but not required to control timing
Ignition timing control does not learn, and requires synchronizing distributor to engine with a timing light
Built in fuel pressure regulator means no extra regulator to mount on your fire wall
Air Conditioning idle speed input kick up
FiTech Go-Spark CD Ignition
FiTech EFI is excited to extend their ignition offerings with the new Go-Spark CD Ignition! The all-new Capacitive Discharge Ignition will deliver high powered sparks from idle to top rpm to improve the combustion event and power output of your engine.
The Go-Spark CDI was designed for both EFI equipped or carbureted engines and features a microprocessor to manage the spark delivery. The ignition, which is assembled in the USA, produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture.
The Go-Spark CDI is designed for 4, 6, and 8-cylinder engines equipped with a distributor. It accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. The tach output signal, which is also used to trigger a FiTech EFI system, is a 12-volt square wave signal that is divorced from other circuits to provide a clean, perfect signal.
Installation Tips
Not legal for use on pollution controlled vehicles. This system is designed to be installed into vehicles that do not require emission controls.
This item is being shipped to you directly from the manufacturer and is subject to an increased handling time. Delivery estimates that include the handling time are displayed on the "Shipping and Payments" tab.
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.