Finished WAVE2 Handheld Dual Channel Digital Oscilloscope 2.4 inch Touch Screen

Description

Product Overview
Finished WAVE2 Handheld Dual Channel Digital Oscilloscope 2.4 inch Touch Screen
Detail
Features:
No. of Channels: 2
Bandwidth: 0 – 200KHz per channel
Sensitivity range: 5mV/DIV – 20V/DIV (using x1 probe)
Maximum input voltage: 50Vpk (using x1 probe)
Maximum real time sampling rate: 1MS/s
Time Base range 10us/DIV – 500s/DIV
X-Y Display Feature: Yes
Built-in 0 – 20KHz (sine) dual channel DDS function generator
Display Resolution: 320 x 240 Color display
Display Size: 2.4″
Touch panel: Yes
Battery or USB powered
Fully contrallable via serial connection
General
2.4” 320x240 color display
Touch panel operation
Y-X mode available
Built-in 2-channel DDS function generator
Light weight and portable
Vertical
Number of Channel: 2
Analog Bandwidth: DC – 200KHz
Sensitivity: 5mV/Div - 20V/Div (with x1 probe)
Sensitivity error: < 5%
Resolution: 12-bit
Input Impedance: 1M ohm / 25pF
Maximum Input Voltage: 50Vpk
Coupling: DC, AC
Horizontal
Max Real-time Sampling Rate: 1Msps (per channel)
Timebase: 10us/Div - 500s/Div
Record Length: 1024 points
Trigger
Trigger Modes: Auto, Normal, Single
Trigger Types: Rising/falling edge
Trigger Position: 1/2 of buffer size
Trigger Source: Ch1, Ch2, External
Maximum external trigger voltage: 15V
External trigger threshold: LVTTL
Function Generator
Number of channel: 2
Waveform type: Sine, Square, Saw-tooth, Stair
Frequency range: DC – 20KHz (Sine)
Amplitude range: 0 – 3V (peak value)
Offset: 0V or +3.3V
Duty Cycle: 0 – 100%
Phase: -360 – 360 degree
Power Supply
Powered on 3.7V Li-ion battery or USB
Current consumption: ~300mA @ 3.7 – 5V
Internal batter charger (optional)
Automatic power off on battery
Battery running time: Appr. 3hrs (when fully charged)
Other Features
Y-X display mode
On-screen measurement display
Save / recall up to 4 captures
Serial output of captured data
Serial port format: LVTTL, 115200bps, 8N1
Built-in 1KHz/3.3V test signal
[NEW]
Complete serial control interface
Physical
Dimension: 115x72x30mm
Weight: 0.29KG (excluding battery and probes)
Package include:
1x WAVE2 oscilloscope (fully assembled and tested)
2x BNC x1/x10 selectable probes
Quick Reference Guide
Shipping Policy
Payment Mathord
Returns Policy
Shipping Policy
1.Items are shipped from china.we will send out within 1 bussiness day after receive the payment.
2.We only ship to ebay confirmed address. So before bidding,  please kindly verify your ebay address.
3.
Shipping to USA takes 8-18 days in normal condition by E-packet with tracking number.
Shipping to most other countries takes about 12-30 days via Economy Int'l Airmail.
Less than , without free tracking number,if you request tracking number,please send ebay message to us.
Over ,with tracking number free.The shipping time depends on your location and local postal service,as well as the  weather condition along the shipping,sometimes may take longer,.please send ebay message to us if you not get the package.
4.
Express shipping: DHL/FEDEX/EMS,Extra  -- will be charged for the first 500 grams for most countries. Contact us if  you need this service.
Payment Mathord
PayPal payment accepted only.
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please send ebay message to us immediately. Returns accepted within 30 days of delivery date.
3. Please send ebay message to us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.