-40%
Fiber Base PNB Nylon Coated Base Milk White, Clear Pink, Milk Pink LED/UV
$ 8.97
- Description
- Size Guide
Description
Fiber UV / LED base with nylon fibersClear Pink - Transparent with a slight pink shade. After polymerization, the nails acquire a natural healthy look.
White Milk - Camouflage, milky-white base, creating the effect of porcelain nails.
Milky Pink Fiber UV / LED base with nylon fibers has a camouflaging milky-pink shade.
Reinforcing basecoat with unique properties.
Contains visible nylon fibers, creating a powerful protective frame on the surface of the nail, at the same time very hard and flexible.
Adding Fiber Base PNB fiber bases serve as a reinforcing element. Protect the nail plate from brittleness and delamination.
Vitamin E and calcium (Ca), which are part of Fiber Base PNB, have a firming effect, the natural growth of healthy nails is resumed.
Fiber Base PNB thick, medium viscosity.
Self-leveling on the surface of the nail, filling irregularities.
Perfect for strengthening, repair, reconstruction of nails, modeling the form and building a small free edge.
Ideal base coat for weak, brittle and thin nails.
Wearability coverage for at least 21 days.
It has a dispersion (sticky) layer, excellent adhesive properties.
Cures in a UV / LED lamp 48 watts - 60 sec.
It is used as an independent gel-lacquer coating and as a base for colored gel-varnish.
Recommendations for application:
We perform standard mechanical preparation of the nail plate.
We treat nails with a Nail Dehydrator degreaser.
Apply acid-free primer Bond Control, dried in air for 30 seconds.
The first layer of the base is applied with a thin layer, rubbing movements. We dry.
After applying another 1 thin layer of the base, not reaching the cuticle of 0.5 mm. We type a small drop of Fiber Base PNB onto the brush and distribute it evenly over the non-dried layer, simulating the shape of the nail. We cure in the UV / LED lamp for 60 seconds.
Apply color gel polish in 1 - 2 layers, drying each. Top cover top.
Tips:
After applying the base layer, you must wait a few seconds while the Fiber Base fibers “sink”. After that, dry in the lamp.
When applying the second base modeling layer, we recommend using a thin brush 10 D PNB.
In case of discomfort during the base polymerization on a very thin, sensitive nail plate, turn on the less intensive mode of polymerization in the lamp.
8 ml, 17 ml
Shipping:
I send worldwide.
I shipping via registered airmail (UkrPoshta with tracking number).
Usually it takes about 10-14 days for a package to arrive to Europe. 12-18 days to USA, Canada and Asia. 14-21 days to Australia.
Returns: 30 days money back, buyer pays return shipping.
Thank You!