Dock Deicer Pond Aeration 3/4hp 5cfm Kit 150' Bubble Curtain Tube +100' WTD Hose

Description

This listing is for 1 - Complete Bubble Tubing® kit w/ all the necessary fittings * less an enclosure* - available separately.
This kit includes:
1 - Brand NEW 3/4 HP Oil-less Rocker Piston Compressor, 115 Volt, 7 CFM, 34+ PSI, 600 watts, 7A, 16.5 lbs.
Air Diffuser; 150 Total feet of 1/2 inch ID Self Weighted Bubble Tubing® (0.1 cfm/ft) * 1 - 100' Section and 1 - 50' Section.
100 feet of 3/8 inch Self-Weighted Tubing w/ Check Valve
1 - 2-way Valve w/ build in Check valves to control air flow to each section of Bubble Tube
Hardware: Hose Connectors and Clamps Included
Compressor Specs:
The Pump Comes ready to be hard wired into a junction box, attached to a plug, or spliced onto a power cord. Easily accomplished with common household tools.  Brown is Hot, Blue is Neutral, Green is Ground.
Also search online for lots of online videos on how to attach a plug to lead wires.
Oil-free, dry-running piston and cylinder
Permanently lubricated bearings
Stainless steel valves
Lightweight components made of die-cast aluminum
Long-lasting high-performance piston seal
Thin-walled, hard-coated aluminum cylinders for optimum heat exchange
Low noise
Condenser motor with high efficiency
115 volt, UL listed motor with thermal protection
Balanced for quiet, low-vibration operation
Inlet filter included
Freestanding operation possible
Wetted parts are corrosion-protected against moisture
1 year warranty.
The compressor will need to be mounted away from any source of water - these are not submersible, they cannot get wet.
WE have brand new locking metal cabinets in our store also or utilize your own enclosure - if mounted inside any cabinet - they must have a cooling fan blowing on them.
The Diffuser Tube
is a durable high-quality lead-free Canadian-made diffuser tubing with a proprietary design that yields high oxygen transfer rates in water.
Aeration with Bubble Tubing® technology
will rejuvenate a body of water by adding the necessary oxygen in the sediments to avoid nutrient release, which generates significant algae and plant growth. In winter, these anoxic conditions often lead to fish kill since the released gases from the sediments are trapped under the ice. With aeration, the body of water is destratified and the oxygen released by the Bubble Tubing® in the sediment level feed the aerobic bacteria that decomposes the organic matter. The oxygen remains available for fish, invertebrates and microbes and maintains a balance in the ecosystem. Aeration in winter also acts like a deicing system since it avoids the ice formation and makes it possible for gases like H2S to be released.  With proper aeration, organic sediments are degraded over time and water depth returns to its non organic form. We call it bio-dredging phenomenon.
A reliable and economical solution for more than 20 years, Bubble Tubing® is designed to aerate various applications such as lakes, ponds, frac ponds, reservoirs, aeration lagoons, wastewater treatment plants, water tanks. drinking water, leachate ponds, fish farms, aquaculture, rainwater retention ponds, irrigation canals, industrial pits, moats, underground reservoirs, sewers, pipes, lagoons, reserves, dams, dykes and all other water bodies.
Installing this tube submerged to the bottom of the water creates a line of bubbles that rises to the surface and causes water to circulate. The advantage of the Bubble Tubing® linear diffuser hose is that its micro-bubbles are released over great distances and then cover a large area. The Bubble Tubing® is therefore very effective and performs in a wide variety of projects.
Typical Applications of this kit w/ Bubble Tubing®:
Aeration in fresh, salt or brackish water;
Wastewater aeration lagoons;
Wastewater treatment plants;
Leachate ponds;
Natural ponds;
Irrigation ponds;
Lakes;
Aquaculture ponds;
Rainwater retention basins;
Canals and any other type of body of water.
De-icing Capabilities as well:
Although the Bubble Tubing® diffuser releases bubbles that will oxygenate the water, it is not only used for this purpose. Our air diffusers also melt ice in winter conditions;
Bubbles released by submerged Bubble Tubing® move the deeper, warmer water to the surface, thawing and weakening the ice on the surface and around infrastructures. Bubble Tubing® creates an opening in the ice. The size of opening varies depending on water temperature, the depth of diffuser and environmental factors like the wind.
Prevent the Formation of Ice
The formation of ice in winter may cause damage or affect the performance of some businesses. Bubble Tubing
®
has more than a thousand installations around the world where we use our proven equipment to weaken ice in winter.
Protection of Maritime Infrastructure
The use of Bubble Tubing
® in straight lines ensures de-icing of critical areas so that marine work can be carried out all winter long. Bubble Tubing® installations are safely activated from the bank.
Deicing of Sea Lanes
Deicing with Bubble Tubing®
is a simple and economical solution to allow navigation throughout the year.
Since Bubble Tubing® was marketed in 2004, more than 1,000 deicing projects have been implemented in Canada and in several Nordic countries as well.
These kits are simple and easy to install.  Simply unroll the Diffuser Tube, attach it to the Self Sinking tube via the included check valve, run the sink tube on land to the compressor or bury from the pond to the compressor.  Attach to the compressor, wire it up, and turn it on.  Complete instructions included.
These are a perfect DIY kit sold much cheaper than the competition.  Also available in longer lengths!
Subsurface aerators are a great solution for many of our customers, especially since Deep Aire subsurface aerators do not require electricity to be in a pond. We broke down all you need to know about one of our best pond aerators to help your pond stay clean and healthy.
Subsurface aerators, or diffused aeration systems, are designed as an alternative source of aeration, taking oxygen to a pond’s lowest depth along the bottom. Diffused air systems utilize an air compressor, located on the shore, that delivers oxygen through a hose to a special diffuser lying on the pond bottom.
A submersible aerator or large pond aerator like this one keeps the pond or lake clean and healthy without a large spray pattern. A Deep Air subsurface aeration system is perfect if you’re looking for something that requires no above surface water spray, surface obstructions, or installations that prohibit the use of electricity in the water.
PERFECT FOR
Ponds on golf courses
Ponds in public places
Any body of water that needs to regulate water aeration
Anyone wanting an aerator but not a big spray pattern
Body of water installations that prohibit the use of electricity in the water
Recreational bodies of water like lakes or swimming areas.
PERKS
No electricity required at the water’s edge. Your compressor needs electricity, but the compressor can be located wherever you desire.
No floating object on the water surface enabling you to go boating or fishing
Lower maintenance and service costs due to no moving parts in the water
Safer swimming. These systems do not require electricity to be in the pond.
Eliminates thermal stratification, making it ideal for deep-water applications
One compressor aerates one long, narrow pond, or two small ponds
Improves water quality and clarity
Low operating cost.
HOW IT WORKS
These Units are a subsurface aeration system with a piston type air compressor, air hose, and an air diffuser. Designed to improve oxygen levels and destratification in deep bodies of water.
The shore mounted rocking piston compressor produces compressed air through a air tube to a membrane diffuser located on the bottom of the pond. The compressed air is released into the water through the membrane diffuser releasing thousands of fine bubbles, which rise to the surface. As the bubbles of air rise, oxygen is transferred into the water. Simultaneously, as the bubbles rise, water is pulled upward, creating a flow of water from the bottom of the pond to the surface.
THINGS TO CONSIDER
When selecting a subsurface aeration system, consider the shape, surface area, and depth of the pond. The amount of surface area the diffused system will effectively cover is dependent on the depth of the shape of the pond. The area of coverage increases the deeper the diffuser is located in the water.
The shape of a pond also affects the number of diffusers needed. An irregular shaped pond, (i.e. kidney-shaped), rectangular, or one with an island or peninsula, will require multiple diffusers to adequately disperse the oxygen.