Digital Bridge LCR Metetr Resistor Inductance Capacitance Tester + Kelvin Clip

Description

Product Overview
Digital Bridge LCR Metetr Resistor Inductance Capacitance Tester + Kelvin Clip
Detail
Measurement source
Frequency 0 Hz (DC) 100 Hz 120 Hz 1000 Hz 10 kHz Error ± 100 ppm
Voltage 0 Hz (DC): 0.56 V ± 5% AC AC RMS: 100 mV 300 mV 600 mV ± 5%
Internal resistance AC DC Constant 100Ω ± 5%
Basic Accuracy
Z / R / L / C: ± reading × 0.2%
Θ: 100 Hz 120 Hz 1 KHz & lt; 0.005 ° 10 KHz & lt; 0.05 °
See the user manual for a detailed description
Display range
Four significant figures, decimal 0000--9999.
Impedance / resistance: 0.1mΩ-999.9MΩ (the minimum resolution is only 0.1mΩ, 100mΩ the following three significant figures)
Inductance / Capacitance: 0.000uH - 999.9KH 0.000P - 999.9mF
Quality factor / loss factor: Q: 0.0000 --- 99999 D: 0.0000 --- 99999
Impedance angle θ: -179.99 ° --- 0.0000 --- + 180.00 °
Display parameters
Window 43 × 29 mm Effective display area 37 × 23 mm
LCD128 × 64 automatic backlight
The update frequency is 3.75Hz
Measurement method
Automatic range control
Body clip clip socket: direct four-wire mode
External test line: external four-wire or two-wire mode
Measurement results display and model
Resistance, inductance, capacitance, Q value, D value, phase angle
Ls (Cs) -Rs-Q model, Lp (Cp) -Rp-D model, Z-theta model
measure time
Since the measured components from the start, the main parameters of about 1 second secondary parameters ≥ 1 second
Power supply and charging
Built-in 3.7V / 450mAH lithium polymer rechargeable battery
Single-button press the switch machine
Undervoltage automatic shutdown 3.55V ± 0.05 V
Charging power DC5V, Ф3.5mm inside and outside core plug, inside + outside -
Charging time of about 1.5H - 2.0H cumulative use of time ≮ 8 hours
Power consumption
Maximum operating current of 27mA (dark ambient backlight automatically adjust the brightest, non-test state)
Basic operating current 23mA (bright environment backlight automatically adjusts the darkest, non-test state)
Power off state consumption <1uA
Automatic shutdown time
15 ± 2 minutes, automatic shutdown time to remind the pre-1 minute
Short press the power switch to maintain power on, automatic shutdown timer to time. See the user manual for details
size and weight:
103 × 69 × 24 mm
180g
Package include:
1 x Digital Bridge LCR Metetr Resistor Inductance Capacitance Tester
2 x Kelvin Clip
2 x Test Leads
Shipping Policy
Payment Mathord
Returns Policy
Shipping Policy
1.Items are shipped from china.we will send out within 1 bussiness day after receive the payment.
2.We only ship to ebay confirmed address. So before bidding,  please kindly verify your ebay address.
3.
Shipping to USA takes 8-18 days in normal condition by E-packet with tracking number.
Shipping to most other countries takes about 12-30 days via Economy Int'l Airmail.
Less than , without free tracking number,if you request tracking number,please send ebay message to us.
Over ,with tracking number free.The shipping time depends on your location and local postal service,as well as the  weather condition along the shipping,sometimes may take longer,.please send ebay message to us if you not get the package.
4.
Express shipping: DHL/FEDEX/EMS,Extra  -- will be charged for the first 500 grams for most countries. Contact us if  you need this service.
Payment Mathord
PayPal payment accepted only.
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please send ebay message to us immediately. Returns accepted within 30 days of delivery date.
3. Please send ebay message to us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.