Bykski GPU Block / EVGA RTX 3080/ti/3090 EVGA ftw3 W/ temp sensor and backplate

Description

this bykski waterblock is for the RTX 3080/3080 ti/3090 FTW3 ultra model by evga. it is used but i flushed it out really well. it comes with an inline temperature sensor on the terminal of the gpu. i have also included a bitspower inline temperature sensor. ii have thrown in some thermal pads basically because the pads that came with the waterblock were really bad.
the rgb is 3 pin 5v.
if you have any questions feel free to ask me.
i just read the official reviews for this waterblock, and to be honest they are true... i had to source the proper screws for the backplate. the thermal pads it came with were pretty bad. you basically need like 6MM of thermal pads for 2 areas of the pcb where capacitors are. but the vrms themselves are fine and so are the ram. other than that it's a good waterblock. installation is pretty straight forward you just take off the old heatsink and clean it well. then install the gpu block. you can check a review/ how to guide on a channel called "Frame chasers" on youtube if you need help.