-40%
ATmega32 Board, LCD, Keypad, uSD, LEDs, IR, RS232, Temp.Sensor

ATmega32 Board, LCD, Keypad, uSD, LEDs, IR, RS232, Temp.Sensor

$ 21.12

Availability: 100 in stock
  • Refund will be given as: Money Back
  • Condition: New
  • Return shipping will be paid by: Buyer
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • All returns accepted: Returns Accepted
  • Item must be returned within: 14 Days

    Description

    ATmega32 Board, LCD, Keypad, uSD, LEDs, IR, RS232, Temp.Sensor
    EM-STK-AVR
    The AVR Project Board is a complete and easy-to-use development board for Atmel ATmega32 and compatible microcontrollers. The board comes with an ATmega32 installed, and includes the following interface circuitry:
    4×4 Keypad Matrix
    I2C Real Time Clock (DS1307)
    I2C EEPROM (24C256)
    Alphanumeric LCD, 16 characters by 2 lines
    MicroSD Card slot
    Switches
    RS232
    Buzzer
    LEDs
    IR transmitter LED
    IR receiver with comparator
    TSOP1783 IR Receiver
    Temperature Sensor
    Header pins provide access to these circuits. A pack of 20 F-F jumper wires is included for facilitating connections. The board has a
    5×2-pin ISP connector
    (top view on target board) for programming the microcontroller using an
    AVR ISP Programmer
    .
    AVR Project Board Setup
    By default, the ATmega32 on the board has JTAG enabled which prevents I/O operation for some PortC pins, and is set to use its
    1 MHz
    internal oscillator instead of the
    4 MHz
    external oscillator on the board.
    To have access to all the PortC pins, be sure to set the following fuse bits:
    To use external 4 MHz oscillator
    High Fuse Bit — 0xD9
    Low Fuse Bit — 0xee
    To use internal 1 MHz oscillator
    High Fuse Bit — 0xD9
    Low Fuse Bit — 0xe1