-40%
8
8
8
8
8
8
8
8
8
8

8" New Plastic Impulse Heat Poly Bag Sealer Plastic Closer Machine Quick Sealing

$ 12.13

Availability: 10 in stock
  • Impulse Power: 300W
  • Size: 8"
  • Refund will be given as: Money Back
  • Brand: Unbranded/Generic
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • MPN: Does Not Apply
  • Bundle Listing: Yes
  • Restocking Fee: No
  • Condition: New

    Description

    8" New Plastic Impulse Heat Poly Bag Sealer Plastic Closer Machine Quick Sealing
    Introductions:
    This Plastic Heat Sealer is the machine of mechanical seal packing container. In order to keep the product quality and avoid the loss of product, it can be used to seal the product after into the container. And you can use it with power-saving that save your money. The heat time is very short, and don't waste your time. The weight of this machine is light, you can use it easily. Come to order and try it.
    Features:
    1. Suitable for PE/PP bags
    2. Light weight, easy to use it
    3. Strong power but don't waste electricity
    4. Heat time is short
    5. It is made of plastic material
    6. More accurate with precision electronic control
    7. Avoid the loss of product
    Specifications:
    1. Sealing Length: 7.87" / 20cm
    2. Source: 110V / 50Hz
    3. Power: 300W
    4. Suitable for: PE/PP Bags
    5. Impluse Sealing for: Power-saving
    6. Circuit: Precision Electronic Control
    7. Max Sealing Thickness: 0.2mm
    8. Heat Time: 0.2 -1.3s
    9. Color: Blue
    10. Dimensions: (12.99 x 3.94 x 6.77)" / (33 x 10 x 17.2)cm (L x W x H)
    11. Weight: 45.86oz / 1300g
    12. Size: 8"
    13. Plug Type: US Standard
    14. Material: Plastic
    Package Includes:
    1 x Heat Sealer
    1 x Teflon Tapes
    How  to  Use：
    1.  No  power  switch  required  (auto-control),  link  the  AC  power  cord  with  socket,  adjust  heating  time  just  according  to  the  thickness  of  sealing-in  material;  put  the  plastic  bag  on  the  sealing-in  surface  and  press  the  handle,  the  circuit  will  automatically  control  heating  time.  The  power  will  automatically  shut  down  when  the  indicator  light  goes  out.  After  1-2  seconds,  release  the  handle  to  finish  sealing.
    2.  Any  damage  occurs  during  sealing  is  because  of  over-long  heating  time,  please  spin  the  rotary  knob  anticlockwise  to  shorten  heating  time.
    3.  Too-short  heating  time  will  cause  unstable  sealing.  Please  spin  the  rotary  knob  clockwise  to  lengthen  heating  time
    4.  If  the  plastic  bag  sticks  to  rubber  pressing  board,  it  means  the  cooling  time  is  insufficient.  You  must  lengthen  the  cooling  time  after  indicator  light  extinguishment.  Slightly  late  to  release  the  handle
    5.  Remain  the  heating  time  unchanged  after  adjustment,  and  no  need  to  adjust  it  during  continuous  service.
    6.  Keep  AC  power  cord  always  inserting  on  the  socket,  no  electricity  consumption  when  there  is  no  sealing.
    Warm  Prompt
    1.  Always  keep  the  sealing  surface  clean,  avoid  any  residue  oxidation  on  the  surface  to  reduce  ribbon  heater  and  lifespan  of  heat-resisting  fabric.
    2.  Don't  use  wet  cloth  to  scrub  sealing  surface.
    3.  Worn-out  liner  under  ribbon  heater  will  cause  short  circuit  and  finally  damage  the  ribbon  heater.  So,  it  is  a  must  to  check  up  liner  condition  every  time  you  change  ribbon  heater.  Replace  a  new  one  once  there  is  any  damage.
    4.  When  you  have  to  change  the  ribbon  heater,  you  must  choose  a  ribbon  heater  with  the  same  specification  to  original  one.
    Troubleshooting
    The  following  listed  cases  are  excluded  to  quality  issue
    1.  Repeated  usage  of  heater  strip  breaks  due  to  autoxidation,  which  leads  to  electricity  failure,  suggest  to  replace  a  new  one  (oxidation  under  high-temperature  is  normal  phenomenon)
    2.  Inner  coil  burnout  or  damage  caused  by  overload  continuous  usage  or  wrong  operation
    3.  Any  man-made  damage  leads  to  non-operation  cases
    Note:  suggest  to  keep  heating  gear  between  3-5  mode,  it  helps  to  extend  the  lifespan  of  machine;  long-term  working  on  high-gear  will  easily  lead  to  burn-up  of  inner  parts.  If  the  inner  coil  is  burnt  out,  the  machine  will  be  disposed  as  scrap.
    Payment
    Delivery details
    Terms of sales
    About us
    Payment
    We only accept payment through PayPal.
    Payment should be completed within 3-4 days ,after 3-4 days,"Unpaid" will be reported to eBay for returning final fees.
    Delivery details
    The items will be shipped by Registered Airmail with tracking number.
    The items will be sent within 1-2 working days after payment received. Normally, it will be delivered in 2-5 business days.
    Terms of sales
    Although we did a solid and safe packaging, it may still suffer some damage or missing during transportation, so please check the package and items before signing your name. If products are broken and lost, please contact us ASAP.
    If you find what you received is not the item as describes, please contact us, it is our duty to deal with it properly and give you satisfying solution.
    About us
    Our working time:
    Monday to Saturday from 9:00 am to 7:00 pm (GMT+8)
    .
    We may be not reply you on time on Weekend. Please kindly wait
    Any other problems about the products and returns, please contact us by E-mail, we will reply to you quickly and try our best to serve you. thank you in advance.