10MHz DDS Function Signal Generator Frequency Counter Square Wave Sweep BNC TTL

Description

Product Overview
10MHz DDS Function Signal Generator Frequency Counter Square Wave Sweep BNC TTL
Detail
10MHz DDS Function Signal Generator Frequency Counter Square Wave Sweep BNC TTL
The module use direct digital synthesis (DDS) technology and FPGA design. With wide voltage power supply (DC9V-DC40V), it can output Sine wave, Square wave (Duty cycle adjustable from 1% to 99%) and Triangle wave (include sawtooth wave). Maximum effective output is greater than 10Vpp with resolution of 0.01Hz (10mHz). Output amplitude and DC offset can be adjusted continuously. It has two sweep functions, linear sweep and logarithmic sweep. Both the sweep range and the sweep time can be set up optionally. Meanwhile, it integrates other multiple functions into one, including synchronized TTL output, exterior frequency measuring and counter function. It has the advantages of convenient operation, high stability of the signal, one-key operation, BNC port output, output amplitude one-key Attenuation, Dual-channel TTL electric level differentially output, Embedded panel mounting structure, easy integration with customer products etc.. It’s the ideal instrument for electronic enthusiasts, laboratories, production lines, teaching and scientific researchers. It can also be used as supporting module for industrial equipment. Recently, it has already widely used in teaching instruments and industrial control equipments. It is a highly cost-effective product!
It has excellent technical indexes and function features:
◆Compact size, multiple functions, easy to carry.
◆Wide voltage DC power supply (DC9V-DC40V).
◆Embedded panel mounting structure, easy to integrate with customer products.
◆High frequency accuracy: ±5×10－6
◆High resolution: 10 mHz
◆All range continuously adjustable, digital setting.
◆High waveform accuracy: The output waveform synthesis by calculating function.
◆One-key controlled signal output.
◆3.3V TTL electric level output.
◆Several different waveforms: Sine wave, Square wave (Duty cycle adjustable) and Triangle wave (include sawtooth wave).
◆Sweep function: Linear sweep, Logarithmic sweep. Starting and stop points can be set optionally.
◆Save function: 10 sets of parameters defined by the users can be saved and loaded anytime.
◆Operation mode: Button controlled, LCD display, digital setting, knob adjusted continuously.
◆Output mode：Standard BNC port output.
◆Highly reliable：Large scale integrated circuit, Surface mounting technology, reliable and durable.
◆Frequency measurement：Frequency of internal / external signal can be measured through built-in 60MHz frequency meter.
Main technology indexes
◆
Signal Output function
Output waveforms             Sine wave, Square wave (Duty cycle adjustable) and Triangle wave (include sawtooth wave)
Output amplitude
≥10Vp-p (signal output, no load)（MAX）
About 0.1Vp-p (MIN)
Output impedance
51Ω±10%(signal output)
DC offset
±3V(no load)
Frequency range
0.01Hz ~ 10MHz(SGP1010S)
0.01Hz ~ 5MHz(SGP1005S)
0.01Hz ~ 8MHz(SGP1008S)
Resolution
0.01Hz(10mHz)
Frequency accuracy
±5×10－6
Frequency Stability
±2×10－6/3 Hours
Sine wave distortion
≤0.8% (reference frequency is 1kHz)
Triangle linearity
≥98%  (0.01Hz~10kHz)
Rise and fall time of square wave ≤100ns
Square Wave Duty range        1%~99%(digital control mode)

TTL Output  function
Frequency range
0.01Hz ~ 2MHz (SGP1002S)
0.01Hz ~ 5MHz (SGP1005S)
0.01Hz ~ 8MHz (SGP1008S)
0.01Hz ~ 10MHz (SGP1010S)
Amplitude                     >3Vp-p
Fan Out                       >20 TTL loads

COUNTER  function
Counter Range                 0-4294967295
Frequency Meter Range          1Hz~60MHz
Input Voltage Range             0.5Vp-p~20Vp-p

SWEEP  function
Sweep mode                   Linear sweep, Logarithmic sweep
Frequency setting range          0.01Hz ~ 10MHz (SGP1010S)
Sweep range                   fM1 (pre-set) to fM2 (pre-set)
Sweep time                    1s~99s

Others
Display
LCD1602 in English
Save and Load Parameter      M0-M9(M0: default load)
Size                       135mm (Length)×65 mm(Width)×35mm(Height)
Buzzer warning tone          Can be turned On/Off by setting
Production technology        Surface mounting technology, large scale integrated circuit, reliable and durable
Operation feature            Button-controlled, Knob-adjusted continuously
Conditions requirement       Temp: 0~40℃   Humidity: ﹤80%
Package include:
1 x
10MHz DDS Function Signal Generator Frequency Counter Square Wave Sweep BNC TTL
1 x Power adapter
1 x Test Clip
Shipping Policy
Payment Mathord
Returns Policy
Shipping Policy
1.Items are shipped from china.we will send out within 1 bussiness day after receive the payment.
2.We only ship to ebay confirmed address. So before bidding,  please kindly verify your ebay address.
3.
Shipping to USA takes 8-18 days in normal condition by E-packet with tracking number.
Shipping to most other countries takes about 12-30 days via Economy Int'l Airmail.
Less than , without free tracking number,if you request tracking number,please send ebay message to us.
Over ,with tracking number free.The shipping time depends on your location and local postal service,as well as the  weather condition along the shipping,sometimes may take longer,.please send ebay message to us if you not get the package.
4.
Express shipping: DHL/FEDEX/EMS,Extra  -- will be charged for the first 500 grams for most countries. Contact us if  you need this service.
Payment Mathord
PayPal payment accepted only.
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please send ebay message to us immediately. Returns accepted within 30 days of delivery date.
3. Please send ebay message to us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.